WET SURFACE EVAPORATIVE COOLER - JENNINGS ALBERTS, INC..
See Maintenance Guidelines for both cooler types. Air-cooled condensers, natural draft dry cooling towers and air-cooled heat exchangers. Air is drawn over the finned coil by the fan temperatures by utilizing evaporative cooling. Find the company you need for the job at Niagara Blower Heat Transfer Solutions. t o = temperature out of the cooler (o C) t i = air temperature in to the cooler (o C) Wet Surface Cooling. We have existing Wet surface air cooler but the calculations for the same are not available. 13.4 Wet Cooling Towers 13.4.1 General moisture content and the wet bulb temperature of the air passing through the cooling cumulative surface area. Flotech offer Niagara™ Wet Surface Air Cooler (WSAC) systems that are capable of industrial cooling on a truly massive scale. Wet Surface Air Cooled (WSAC) heat exchangers. The spray water then falls from the wetted coil onto the wet-deck surface section, where it is cooled to enhance the evaporative cooling function.
INDUSTRIAL HEAT EXCHANGERS IN ONTARIO.
The Wet Surface Air Cooler (WSAC™) is a closed loop cooling system that is an alternative to a Cooling Tower / Heat Exchanger system. cooling of a water-wetted (or even ice-covered), ventilated surface. An evaporative cooler (also swamp cooler, desert cooler, and wet air cooler) is a device that cools air through the evaporation of water. occurs when air, that is not too humid, passes over a wet surface; the faster the rate of evaporation the greater the cooling. The cooling effect stud in this part of the procedure is the basis for swamp coolers. Find Air Cooler Wet Surface Heat Exchangers suppliers in Europe. Direct evaporative coolers blow air over a wet surface. Wet porous materials or pads provide a large water surface in which the air is moistened and the pad is wetted by dripping water. air cooler cools air through evaporation. A fan inside the case blows air across water-saturated sponges or pads. In a WSAC system, warm process fluids or vapors are cooled in a closed-loop tube bundle (the process fluid being cooled never comes in contact with the outside air).
CLOSED-LOOP (WET SURFACE) PETER G. DEMAKOS, P.E. NIAGARA BLOWER.
Evaporative cooling needs only two factors to work: water and moving air. When air is moved across a wet surface, some of the water on the surface evaporates.
URL: http://www.jenningsalberts.com